The short answer

A larger contract usually arrives with an insurance clause, an indemnity clause and a limit on liability. Read them as three separate things, then compare each one with what your policies actually say.

  • What you promise and what is insured are different documents. The contract sets your obligations. Your policy schedule and wording decide what an insurer may pay.
  • Buying the policy the contract names is not the same as complying with the clause. The insured entity, the activities, the limit, the territory and the dates all have to line up.
  • A certificate of insurance is a summary. It does not show how a particular loss would be treated.
  • Do this before you sign, while the wording can still be negotiated, and take the open questions to a lawyer and a licensed insurance professional.

Winning bigger work is a sign that your business is ready for more. The contract that comes with it tends to be longer than the ones you are used to, and somewhere in it is a schedule of insurance requirements. Treat that schedule the way you treat staffing, delivery dates and cash flow: as part of preparing to deliver, not as paperwork to clear in the last week.

This article gives you a worksheet for that review. It is general information, not legal advice, and it does not replace a review of your own contract and policies.

Three clauses that are easy to blur together

The insurance clause

This lists the policies your client expects you to hold, the minimum limits, and often extras such as naming the client on your policy or providing a certificate. It is a promise to buy and maintain insurance on stated terms.

The indemnity clause

This is a promise to make good the client's loss in defined situations. Indian law recognises it directly: the Indian Contract Act, 1872 defines a contract of indemnity as one where a party promises to save the other from loss caused by the promisor's own conduct or by someone else's (section 124). Section 125 sets out what the indemnified party can recover when sued, including damages, costs and sums paid under a prudent compromise. An indemnity can be far wider than anything a policy covers. You owe it whether or not an insurer pays.

The limitation of liability clause

This caps what you can owe, and usually lists carve-outs where the cap does not apply. Check whether the indemnities sit inside the cap or outside it, and how the cap compares with your insurance limits. A cap is a contract term your lawyer negotiates. A limit of indemnity is the most your insurer may pay. Neither one sets the other.

Where the contract and the policy commonly differ

Policy wordings vary by insurer and product, so the points below are things to check, not rules. To keep this concrete, we read two wordings filed by one Indian insurer: a miscellaneous professional indemnity policy and an occurrence-based commercial general liability policy (details under Sources). They are illustrations only. Your own wording may differ on every point.

  • Liability you take on by contract. The professional indemnity wording excludes liability "assumed or accepted" under a contract, except to the extent you would have been legally liable anyway without that contract. It also excludes express guarantees and warranties, including a warranty that what you supply will be fit for its intended purpose. The general liability wording has a similar contractual liability exclusion, with listed exceptions, one of which is agreements specified in the schedule. So an indemnity that goes beyond your ordinary legal liability may be yours to carry.
  • Penalties and liquidated damages. Both wordings we read exclude contractual penalties and liquidated damages. The professional indemnity wording also says that late delivery or delay is not, by itself, a wrongful act. If your contract has service credits or delay damages, treat them as a commercial exposure to price and manage.
  • Timing. The professional indemnity wording is claims-made: it responds to a claim first made during the period of insurance (or an extended reporting period) for an act on or after the retroactive date in the schedule. Matters already notified under an earlier policy, or known before inception, are excluded. The general liability wording responds to injury or damage happening during the period of insurance. If the contract says "maintain cover for three years after completion", that matters most for claims-made covers, where a lapse can leave completed work without a policy to respond.
  • Where and under which law. In the professional indemnity wording, cover applies to losses, claims and acts within the territorial scope stated in the schedule. The general liability wording defines its territory as worldwide except North America (with a narrow allowance for exported products) and is subject to Indian law and Indian courts. Compare that with where you will work and where the contract says disputes will be heard.
  • Who is insured. The contracting entity must be an insured under the policy. In the professional indemnity wording, a service provider working for you is not an insured; liability you bear for a service provider's error is an optional extension that applies only if the schedule shows it. Subsidiaries are covered on defined terms. If a group company signs, or subcontractors deliver part of the work, ask how each is treated.
  • Different covers for different harm. The professional indemnity wording excludes bodily injury and property damage; the general liability wording excludes professional advice given for a fee, injury to employees covered by workers' compensation legislation, and product recall costs. That is why contracts often list several policies. Our comparison of professional indemnity and general liability explains the split.

Employees and contract workers

Liability to compensate employees injured at work is statutory. Under Chapter VII of the Code on Social Security, 2020, an employer is liable to pay compensation when personal injury is caused to an employee by an accident arising out of and in the course of employment (section 74). Where a business contracts out work that is ordinarily part of its own trade, it can be liable to the contractor's employees and is entitled to be indemnified by the contractor (section 85). That is one reason a client may ask for proof of your employee compensation cover. These provisions took effect on 21 November 2025, when the Code replaced the Employees' Compensation Act, 1923 (the same duties sat in sections 3 and 12 of that Act). Older contracts and policy wordings may still name the 1923 Act, so ask your adviser which reference your contract should use.

Contract insurance review worksheet

Copy this table and fill it in with the contract on one side and your policy schedules and wordings on the other. Mark every row "matches", "gap" or "to ask".

AreaWhat the contract saysWhat to check in your policy
1. Who is insuredWhich legal entity signs? Are group companies, joint-venture partners or subcontractors delivering part of the work?Is the signing entity the named insured? How are subsidiaries, employees and subcontractors treated? Does the client require subcontractors to hold their own cover?
2. ActivitiesThe full scope of work, including anything new to your business.Does the business description or "professional services" definition in the schedule cover every activity in the scope?
3. Covers and limitsEach cover requested: professional indemnity, commercial general or public liability, product liability, cyber, employer's liability or employee compensation, and directors' and officers' cover where asked. Minimum limit for each.Do you hold each cover? Is the limit per claim, in the aggregate, or both? Are defence costs inside the limit? What deductible or retention do you bear on each claim? Is the limit shared with other contracts or group companies?
4. Territory and jurisdictionWhere the work is done, where the client and its users are, governing law and dispute forum.Territorial scope and jurisdiction in the schedule. Any exclusion or special condition for particular countries.
5. DatesStart date, duration, and how long cover must be maintained after the work ends.Policy period. Claims-made or occurrence basis. Retroactive date (is it before you start work?). Extended reporting period terms. Your plan to keep renewing for the required years.
6. Requested extrasClient as additional insured; waiver of subrogation; "primary and non-contributory" wording; certificate of insurance; notice to the client before cancellation.Does your wording already allow each item, or does it need an endorsement the insurer must agree to? Does the "other insurance" clause conflict with a primary wording? Who must be told if the policy is cancelled?
7. Exclusions against obligationsIndemnities, warranties, guarantees, penalties, liquidated damages, service credits.Contractual liability exclusion and its exceptions. Fines, penalties and liquidated damages. Known circumstances and prior notifications.
8. Cap against limitsLiability cap, carve-outs, uncapped indemnities.Which uncapped or carved-out items fall outside your cover or above your limits? These are yours to carry, negotiate or decline.
9. Questions for reviewFor your lawyer: Can the indemnity be limited to losses caused by our negligence or breach? Can it sit inside the cap? Can insurance obligations be subject to cover being available on reasonable terms?For a licensed insurance professional: Which requirements can the insurer confirm in writing? What needs an endorsement, a higher limit or a new policy? What cannot be insured at all?

What a certificate of insurance does and does not show

Clients often ask for a certificate as evidence of cover. It typically summarises the policy at the time it is issued: insurer, insured, cover type, period and limits. It does not reproduce the exclusions and conditions, and it cannot tell anyone how a future loss will be assessed. The policy wording, schedule and endorsements govern. Naming a client as an additional insured, waiving subrogation or changing how your policy sits beside the client's own insurance are changes to the policy, so they need the insurer's agreement.

The wordings we read show why. The general liability wording treats a party you must insure under a written contract as an insured, but only to the extent the contract requires and within the policy's own cover and limits. Its "other insurance" condition limits the insurer's liability to the excess over other valid insurance, which is the opposite of a "primary" requirement unless changed. Its cancellation condition provides for seven days' notice to the insured. The professional indemnity wording honours a waiver of subrogation given to a client in a written contract before any claim. Another insurer's wording may treat each of these differently.

Using what the worksheet shows

Each gap has a small number of possible answers: negotiate the clause, change the cover, change how you deliver, accept the exposure with your eyes open, or decide that the contract is not right on these terms. Insurance cannot turn an unsuitable contract into a safe one, and no policy guarantees that a claim will be paid. What the review gives you is a clear view of which commitments are backed by cover and which rest on your balance sheet.

If you want more background before the conversation, these may help: what professional indemnity covers, how a client dispute can unfold, cyber insurance for businesses and directors' and officers' cover. For how AVYA approaches business protection, see AVYA for Business.

Questions people ask

If I buy the policy named in the contract, have I met the insurance requirement?

Not necessarily. The clause usually sets more than a policy type: the insured entity, the activities covered, the limit and whether it is per claim or aggregate, the territory, the dates and any extras such as naming the client. Each of these has to match your policy schedule and wording. Check them row by row and ask the insurer to confirm in writing what it can and cannot provide.

Does a certificate of insurance prove that a loss will be covered?

No. A certificate typically summarises a policy at the time it is issued, such as the insurer, insured, cover type, period and limits. It does not reproduce the exclusions and conditions and cannot show how a future loss will be assessed. The policy wording, schedule and endorsements govern.

Will my insurance pay for an indemnity I have agreed to in the contract?

It depends on the policy wording and on what the indemnity covers. Liability wordings often exclude liability you take on by contract beyond what you would owe in law anyway, and commonly exclude penalties and liquidated damages; the two wordings we read for this article do both. An indemnity is your promise to the client and you owe it whether or not an insurer pays, so have a lawyer review its scope and a licensed insurance professional check it against your cover.

How long do I need to keep cover in place after the work ends?

For as long as the contract requires, which may be several years after completion. This matters most for claims-made covers such as professional indemnity, which generally respond to claims first made while a policy is in force for work done after the retroactive date. If the cover lapses, a later claim about completed work may have no policy to respond. Check the policy basis, retroactive date and any extended reporting period.

Sources

  1. The Indian Contract Act, 1872, sections 124 and 125 (Chapter VIII, Of Indemnity and Guarantee) — India Code, Legislative Department, Government of India (Act No. 9 of 1872; India Code PDF accessed 11 November 2026)
  2. Miscellaneous Professional Indemnity Policy: Policy Wordings — Zurich Kotak General Insurance Company (India) Limited (UIN IRDAN152CPLB0743V01202526; PDF file dated 16 July 2025; accessed 11 November 2026)
  3. Commercial General Liability Policy (Occurrence based): Policy Wordings — Zurich Kotak General Insurance Company (India) Limited (UIN IRDAN152CPLB0605V01202526; PDF file dated 11 November 2025; accessed 11 November 2026)
  4. The Employee's Compensation Act, 1923, sections 3 and 12 — Bare Act text hosted by the High Court of Tripura (thc.nic.in) (Act No. 8 of 1923, text incorporating amendments up to Act 11 of 2017; accessed 11 November 2026)
  5. Notification S.O. 5319(E), Gazette of India Extraordinary, Part II, Section 3(ii), No. 5143 — Ministry of Labour and Employment, Government of India (copy hosted by Bombay Chamber of Commerce and Industry) (21 November 2025)
  6. Code on Social Security, 2020: Towards Universal and Inclusive Social Protection — Press Information Bureau, Government of India (22 November 2025)
  7. Code on Social Security, 2020, section 74 (employer’s liability for compensation) — bare-act text as reproduced by AdvocateKhoj (official India Code page could not be opened; read 13 November 2026)
  8. Code on Social Security, 2020, section 85 (contracting) — bare-act text as reproduced by AdvocateKhoj (read 13 November 2026)
  9. Code on Social Security, 2020, section 164 (repeal and savings), item 1: the Employees’ Compensation Act, 1923 — bare-act text as reproduced by AdvocateKhoj; brought into force by notification S.O. 5319(E) of 21 November 2025

Links open the source in a new tab. Policy wordings and regulations change; check the current version before relying on any detail.